Hardware for Signature Series
Cable Spacer Bar Kit
Our patented spacer bars allow you to extend the length of your runs between structural support posts, meaning less posts—and less blocking your be...
View full detailsCable Spacer Bar Kit | Black Finish
Our patented spacer bars allow you to extend the length of your runs between structural support posts, meaning less posts—and less blocking your be...
View full detailsStainless Steel Star Drive Socket Head Post Mounting Screw | 4-Pack
Securely mount your Signature, Venture, or Summit series posts to your wood deck or floor with structural screws. Most projects call for 4-1/2" scr...
View full detailsCable Bullet Spare Parts Bundle
Be prepared for anything. Add spare parts to your project materials list to avoid unnecessary delays due to mistakes or misplaced parts.
Cable Bullet Spare Parts Bundle - Black Oxide Finish
Be prepared for anything. Add spare parts to your project materials list to avoid unnecessary delays due to mistakes or misplaced parts.
Post Leveling Plate for Signature and Summit Series
Better Than Shims or Washers, Cable Bullet Post Leveling Plates are designed to position your posts perfectly plumb while protecting your project’s...
View full detailsPost-Side Handrail Bracket
Designed for use with Reinforced Aluminum Handrail, the post-side handrail bracket is used to dead-end your top rail into the side of a Signature s...
View full detailsPost-Side Handrail Bracket | Black Finish
Designed for use with Reinforced Aluminum Handrail, the post-side handrail bracket is used to dead-end your top rail into the side of a Signature S...
View full detailsWall-Mounted Handrail Bracket
Mount any Cable Bullet handrail or custom flat-bottomed top rail to the wall.
Wall-Mounted Handrail Bracket | Black Finish
Mount any Cable Bullet handrail or custom flat-bottomed top rail to the wall.
Post-Mounted Handrail Bracket for Signature Series Cable Railing
Attach post-mounted handrail brackets to the side of Cable Bullet Signature Series railing anywhere an additional grab rail is needed for support o...
View full detailsPost-Mounted Handrail Bracket for Signature Series Cable Railing | Black Finish
Attach post-mounted handrail brackets to the side of Cable Bullet Signature Series railing anywhere an additional grab rail is needed for support o...
View full detailsSignature Series Post Hole Plug
Use this stainless steel plug to close off the holes in any Signature Series terminal post as needed. This is especially useful on stair runs where...
View full detailsSignature Series Post Hole Plug
Use this black stainless steel plug to close off the holes in any Signature Series terminal post as needed. This is especially useful on stair runs...
View full detailsLobed Washer
The Lobed Washer is placed on each end of the cable line and secured with the crimp sleeve. Once inserted into the key-shaped opening of the insta...
View full details10-32 x 1/4" Stainless Steel Half Dog Point Hex Socket Set Screw
These set screws play a crucial role in the cable tensioning process for Cable Bullet tensioners. Once the lobed washer and crimp sleeve are secure...
View full details10-32 x 1/4” Stainless Steel Half Dog Point Hex Socket Set Screw
These set screws are used as part of the tensioning process. Once the lobed washer and crimp sleeve have been set, the cable end is inserted into t...
View full detailsCrimp Sleeve
The Crimp Sleeve caps the ends of each cable line. This anchors both the lobed washer and the set screw during tensioning.
Cable Rail Spacer Bar Standoff
Add the Cable Bullet standoff to any floating spacer bar to connect it to your top rail or deck floor.
Spacer Bar Standoff with Black Oxide Finish
Add the Cable Bullet standoff to any floating spacer bar to connect it to your top rail or deck floor.
10-24 x 1/2" Cup Point 316 Stainless Steel Hex Socket Set Screw
These set screws are used to secure splines and Handrail Hinges inside Reinforced Aluminum Handrail.
Handrail Mounting Screws (4-Pack)
Secure reinforced aluminum handrail to modern post tops on both terminal posts and line posts with these self-tapping 10-24 x 3/4” screws.