Cable Bullet
SKU #
HRS-SP-C
$ 35.00
Clean, Concealed Joints for your Stainless Steel Handrail
Mount your stainless steel handrail to posts and join handrail sections using internal splines. Once installed, all splines are concealed giving your handrail a clean, continuous look free of brackets or cover plates.
The following splines are designed exclusively for Cable Bullet stainless steel handrail.
To join handrail sections or mount handrail to posts, create a custom spline using spline stock or use a fixed corner spline for any level 90-degree corner. If necessary, use a structural epoxy to permanently fix your Delrin splines inside the handrail. For more information, check out How to Install Stainless Steel handrail on Venture Series Posts.
The fixed corner spline is made from Delrin, weather and UV-resistant exterior-grade plastic, and is designed for use at any level, supported corner transition. All Delrin splines are slightly oversized by design and may require a rubber mallet or dead-blow hammer to set in place.
Delrin plastic spline stock is available in 6-inch sticks and is intended to be cut down on-site and modified to create custom splines. Use a miter saw and deck screws as needed. One 6-inch stick is sufficient material to make 1-2 splines. Any custom Delrin spline should be supported by a structural post. Use Venture series handrail mounting screws to connect spline pieces.
