Venture Series Collection

Use a 3/16" Allen key to advance the four leveling set screws at the base of all Cable Bullet posts.

Add the Cable Bullet standoff to any floating spacer bar to connect it to your top rail or deck floor.

Seamlessly cut and crimp cable ends with one tool.

Use the 1/8" hex socket head power bit to quickly and efficiently advance the set screws that tension the cables on Cable Bullet Venture series posts.

Use when installing Post Side Handrail Brackets, Summit Series Stair Panels, and when building custom splines with our #9 x 2-1/2" screws.

This #10-24 tap is used to tap threaded holes for Venture Series Handrail Mounting Screws, fixed cable spacer bars, and Summit Series stair rail br...

This 5/32” Allen wrench is used to drive in Venture Series Handrail Mounting screws as well as screws to mount Summit Series stair rail brackets.

Secure stainless steel handrail to modern post tops on both end posts and line posts with these 10-24 x 3/4” screws.

Finish each end of your stainless steel handrail with a matching end cap for a smooth look.

Avoid over-driven and stripped screws with this magnetic multi-bit screwdriver. 

Our patent pending Handrail Hinge for Stair Corners simplifies the process of transitioning your handrail down a stair run on the inside corner. It...

Our patent pending Handrail Hinge for Stair Ends simplifies the process of terminating your handrail at the top (or bottom) end of your run. It req...

Our patent pending Handrail Hinge for Stair Transitions simplifies the process of transitioning your handrail from a level run to a set of stairs. ...

Better Than Shims or Washers, Cable Bullet Post Leveling Plates are designed to position your posts perfectly plumb while protecting your project’s...