Hardware for Midnight Collection

Our patented spacer bars allow you to extend the length of your runs between structural support posts, meaning less posts—and less blocking your be...

Securely mount your Signature, Venture, or Summit series posts to your wood deck or floor with structural screws. Most projects call for 4-1/2" scr...

Be prepared for anything. Add spare parts to your project materials list to avoid unnecessary delays due to mistakes or misplaced parts.

Better Than Shims or Washers, Cable Bullet Post Leveling Plates are designed to position your posts perfectly plumb while protecting your project’s...

Secure reinforced aluminum handrail to modern post tops on both terminal posts and line posts with these black oxide, self-tapping 10-24 x 3/4” scr...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a structural connection for your aluminum handrail, fixed straigh...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a secure connection for your aluminum handrail, fixed corner spli...

Our patent pending Handrail Hinge for Stair Corners simplifies the process of transitioning your handrail down a stair run on the inside corner. It...

Our patent pending Handrail Hinge for Stair Ends simplifies the process of terminating your handrail at the top (or bottom) end of your run. It req...

Our patent pending Handrail Hinge for Stair Transitions simplifies the process of transitioning your handrail from a level run to a set of stairs. ...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a secure connection for your aluminum handrail, adjustable horizo...

Designed for use with Reinforced Aluminum Handrail, the post-side handrail bracket is used to dead-end your top rail into the side of a Signature S...

Mount any Cable Bullet handrail or custom flat-bottomed top rail to the wall.

Attach post-mounted handrail brackets to the side of Cable Bullet Signature Series railing anywhere an additional grab rail is needed for support o...

Use this black stainless steel plug to close off the holes in any Signature Series terminal post as needed. This is especially useful on stair runs...

The Lobed Washer is placed on each end of the cable line and secured with the crimp sleeve. Once inserted into the key-shaped opening of the insta...

These set screws are used as part of the tensioning process. Once the lobed washer and crimp sleeve have been set, the cable end is inserted into t...

The Crimp Sleeve caps the ends of each cable line. This anchors both the lobed washer and the set screw during tensioning.

Add the Cable Bullet standoff to any floating spacer bar to connect it to your top rail or deck floor.

These set screws are used to secure splines and Handrail Hinges inside Reinforced Aluminum Handrail.