Hardware for Signature Series

Our patented spacer bars allow you to extend the length of your runs between structural support posts, meaning less posts—and less blocking your be...

Securely mount your Signature, Venture, or Summit series posts to your wood deck or floor with structural screws. The recommended screw type and le...

Better Than Shims or Washers, Cable Bullet Post Leveling Plates are designed to position your posts perfectly plumb while protecting your project’s...

Secure reinforced aluminum handrail to internal splines and modern post tops on both terminal posts and line posts with these #8 x 3/4” screws.

Connect your handrail seamlessly with concealed, internal splines. Designed to be a structural connection for your aluminum handrail, fixed straigh...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a secure connection for your aluminum handrail, fixed corner spli...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a structural connection for your aluminum handrail, adjustable st...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a structural connection for your aluminum handrail, adjustable ve...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a secure connection for your aluminum handrail, adjustable horizo...

Connect your handrail seamlessly with concealed, internal splines. Designed to be modified on site, 18” spline stock can be used to create custom s...

Connect your handrail seamlessly with concealed, internal splines. Designed to be a structural connection for your aluminum handrail, adjustable 18...

Mount any Cable Bullet handrail or custom flat-bottomed top rail to the wall.

Attach post-mounted handrail brackets to the side of Cable Bullet Signature Series railing anywhere an additional grab rail is needed for support o...

Use this stainless steel plug to close off the holes in any Signature Series terminal post as needed. This is especially useful on stair runs where...

The Lobed Washer is placed on each end of the cable line and secured with the crimp sleeve. Once inserted into the key-shaped opening of the insta...

These set screws are used as part of the tensioning process. Once the lobed washer and crimp sleeve have been set, the cable end is inserted into t...

The Crimp Sleeve caps the ends of each cable line. This anchors both the lobed washer and the set screw during tensioning.

Add the Cable Bullet standoff to any floating spacer bar to connect it to your top rail or deck floor.