Tools for Signature Series

Avoid Costly Mistakes When Installing Handrail. Our handrail clamp temporarily secures Cable Bullet handrail to line posts to ease the handrail ins...

Everything you need to secure fixed spacer bars to aluminum handrail.

Easily mark drilling points for mounting your cable rail posts with a burst of bright green chalk.

Protect and clean your investment with rust and corrosion protection.

Use Boeshield RustFree to remove any rust, corrosion, or stains from your cable railing to help add to its longevity.

Touch up scratches, chips, and blemishes on the powder coat of your aluminum posts and handrails.

Quickly and efficiently tension cables with this 3/32" power bit.

Use a 3/16" Allen key to advance the four leveling set screws at the base of all Cable Bullet posts.

Avoid frayed cable ends, cable waste, and unnecessary delays by using a quality pair of cable cutters on your project.

Designed for metal, wood, and PVC materials, this 3/16” drill bit offers a 12-inch overall length to accommodate pilot holes for longer post mounti...

The T30 x 6" star drive power bit is used to drive Cable Bullet Post Mounting Screws.

This 1/8" Allen wrench is used to tighten the set screw on the Signature Series and Venture Series modern post top. It is also used to advance the ...

The 3/32" Allen wrench is used to advance the set screws that tension each cable line.

Seamlessly cut and crimp cable ends with one tool.

Use when installing Post Side Handrail Brackets, Summit Series Stair Panels, and when building custom splines with our #9 x 2-1/2" screws.

This 5/32” drill bit is used to drill pilot holes for both Venture Series and Signature Series Handrail Mounting Screws.

Use this Phillips Drive Power Bit to install Signature Series Handrail Mounting Screws and Post Side Handrail Brackets.

This #10-24 tap is used to tap threaded holes for Venture Series Handrail Mounting Screws, fixed cable spacer bars, and Summit Series stair rail br...