No matter your project, any holes you drill must be level. Of course, level holes are important for aesthetic reasons – such as achieving a professional finish. But they’re even more critical for the integrity and safety of your structure.
If you’re wondering how to drill level holes, here are the supplies (you may need depending on your project) and the steps to take.
Necessary Tools & Materials
Measuring tape
Level
Drill
Appropriate-size drill bit for your project
Washers and other anchoring hardware
Proper-sized screws for your project
Screw eyes to ensure a level hole
Pencil or marker to denote hole location
A high-quality drill guide
Clamps to keep your drill guide in place (if necessary)
Safety goggles and other safety gear
How to Drill Level Holes into a Wall Step-by-Step
Assemble your materials and tools.
Measure and mark the placement of your holes.
Hold the drill so that it’s at a 90-degree angle to the wall, and drill your pilot holes.
Determine if the holes line up with your level.
Apply a firm hold and even on your drill and drill your final holes.
Pro Tip: Use a drill guide to achieve greater accuracy.
