Indoor Design, Outdoor Durability
Introducing the sleekest vertical cable railing on the market. The Summit Series offers a modern take on traditional vertical railing—providing a look of sleekness and elegance. With quality in mind, the Summit Series features heavy-duty aluminum posts and our patented tensioning mechanism machined directly into reinforced handrail. All Cable Bullet products are made in the USA with only high-quality components.
Our level panels are made to accommodate 4-foot and 8-foot sections. For runs longer than 8 feet, level panels can be joined using Summit Series Terminal Posts. Posts are sold separately as they will vary by project and layout.
Each Panel Includes:
- (2) Lengths of Rail (one top rail and one base rail)
- (28 | 14) Pre-cut & crimped stainless steel cables
- (56 | 28) Cable set screws
- (1) Stainless steel support bar (8-foot panel only)
- (2) Support bar set screws (8-foot panel only)
- (2) Support bar pins (8-foot panel only)
- Rail attachment set screws (number varies by post type)
What tools & supplies will I need to install my posts?
What else is required to complete my railing?
The following supplies are required for most installations, but quantities and specifics will vary by project. The items listed below are sold separately.
For detailed installation instructions and setup guides, see the Helpful Guides & Resources list on this page.
PLEASE NOTE: Aluminum posts and rail are NOT suitable for use in exterior coastal applications. Summit series railing is designed for inland exterior and interior projects. Exposure to salt will cause accelerated oxidation and galvanic corrosion between aluminum and stainless components.
Setup Guide: Summit Series Setup Guide
Download PDF >
||Recommended for interior & inland exterior projects
T6061 aluminum rails, 316 Stainless Steel cables
Flat Black Fine Texture, AR400 Jet Black Tex Architectural Grade Powder Coat
|Top Rail Height
||36.725" | 42.725"
|Under Rail Spacing
||8' per panel with support bar, 4' per panel without support bar
||1/8" 7x7 stainless steel
||required every 48" (included with 8' panel)