The Right Tools for the Job

The Crimp & Cut Multi-Tool is used to securely compress crimp sleeves and cut cable. The cutting blade and crimping jaws are designed for precision, accuracy, and ease. Each multi-tool features: 

• Cutting blade to cut 5/32" cable
• Crimping jaws to compress crimp sleeve 

If your project is larger than 100 tensioners (or 100 cable cuts), we highly recommend purchasing a larger cutters for easier and faster cable railing installation.

This kit also includes two custom drivers for use with a 1/2" chuck drill/driver to set Bullets. Use the 3/32" Allen Wrench or 6" Hex Socket Head Power Bit with the Magnetic Multi-Bit Screw Driver to advance the set screws that tension each cable run. PLEASE NOTE: The set screws that tension each cable should be advanced by hand, not with a drill/impact driver.

On Signature series railing, the 1/8" Allen is used to secure the modern post tops, and the 5/32" x 6" drill bit and the T20 X 3-1/2" Star Driver Power Bit are used during the aluminum handrail installation. The 3/16" Allen Wrench, T30 x 6" Star Driver Power Bit, and 3/16" aircraft bit are used during the post mounting process (top and side mount posts).

Each installation kit includes:

• (1) Cut & Crimp Multi-Tool
• (2) Cable Bullet Drivers
• (1) Magnetic Multi-Bit Screw Driver
• (3) Allen Wrenches ( 3/32", 1/8", 3/16")
• (1) Hex Socket Head Power Bit (3/32")
• (1) T30 x 6" Star Drive Power Bit
• (1) #2 Phillips Drive Power Bit
• (1) 3/16" Aircraft Drill Bit
• (1) 5/32" x 6" Cobalt Aircraft Extension Drill Bit
• (4) #8 x 3/4" sheet metal screws (for securing splines inside the handrail)
• (1) Cable Bullet spare parts bundle (10 x 1/4-20" set screws, 10 x lobed washers, 10 x crimp sleeves)