Cable Railing for Sleeved Wood Posts

Cable Rail Tensioner Kit for Vinyl or Composite Post Sleeves

$ 12.00

Sleek, modern railing

Give your vinyl or composite sleeve deck railing a modern look and enjoy the open and unobstructed view cable railing offers. These hardware kits are designed for use with a full range of wood post sleeves and sizes, from thin vinyl wraps to large composite post sleeves. The patented tensioning system anchors through the sleeve to the inside of your posts, transferring all the tension to the center post and off the sleeve itself. The simplicity and straight-forward design of this cable rail system make it perfect for both DIY projects and professional contractors.

Continue Reading >

736 in Stock - Ships in 1–2 Business Days

Choose a Size (Length): Standard (1-1/2") XL (1-7/8") XXL (2-3/4")

Choose a Size (Length):

Standard (1-1/2")

XL (1-7/8")

XXL (2-3/4")

Qty:

Add to Cart

Cable Rail Post Hole Cover Kit

$ 1.90

Give your pass-through posts a finishing touch A decorative stainless steel cover designed for cable pass-through holes on intermediate wood, vinyl, composite, or aluminum posts. Ideal for straight or angled pass-through posts, where a clean, high-end finished look is desirable. Covers any...

Cable Rail Dummy Tensioner

$ 5.00 $ 5.70

The Cable Bullet dummy tensioner is designed to look identical to our cable rail tensioners once installed. As a post hole protector, it adds a sense of uniformity and high-end style. On transitional pass-through posts that break a straight run,...

Cable Spacer Bar Kit

$ 35.00

Longer Runs, Fewer Posts to Block Your View

Extend the length of your runs between structural support posts and clean up your view by adding cable spacer bars to your railing. Adding spacer bars will significantly cut down on cable deflection, and allow you to space your bulkier and more expensive support posts further apart!

Continue Reading >

Size Chart

Size Chart - Cable Bullet Spacer Bar

Size	Width	Depth	Height (Floating)*	Height (Fixed)**	Infill***
8-Hole	1/4”	1/4”	21-3/4”	24-3/8”	27"
9-Hole	1/4”	1/4”	24-3/4”	27-3/8”	30"
10-Hole	1/4”	1/4”	27-3/4”	30-3/8”	33"
11-Hole	1/4”	1/4”	30-3/4”	33-3/8”	36"
12-Hole	1/4”	1/4”	33-3/4”	36-3/8”	39"
13-Hole	1/4”	1/4”	36-3/4”	39-3/8”	42"

*Overall height of the spacer bar only.

**Height of the spacer bar with the standoff. This measurement does not include the two threaded ends of the standoff that attach to the spacer bar and top rail.

***To determine your infill, measure the height from the floor (or bottom rail) to the underside of your top rail.
The maximum infill height recommendation is based on 3-inch spacing between cable runs to allow for cable deflection and accommodate stricter interpretations of the International Residential Code (IRC).

61 in Stock - Ships in 1–2 Business Days

8-Hole / Set Screws (Floating) 9-Hole / Set Screws (Floating) 10-Hole / Set Screws (Floating) 11-Hole / Set Screws (Floating) 12-Hole / Set Screws (Floating) 8-Hole / Standoff (Fixed) 9-Hole / Standoff (Fixed) 10-Hole / Standoff (Fixed) 11-Hole / Standoff (Fixed) 12-Hole / Standoff (Fixed) 13-Hole / Set Screws (Floating) 13-Hole / Standoff (Fixed)

Select a Size:

8-Hole

9-Hole

10-Hole

11-Hole

12-Hole

13-Hole

Choose an Attachment Method:

Set Screws (Floating)

Standoff (Fixed)

Qty:

Add to Cart

Signature Series Top Mount Intermediate Post

$ 129.00 $ 139.00

Solid, structural intermediate post with a slim, modern design. These posts coordinate with Signature Series tensioning posts and may be used as structural support with wood or composite post sleeve decks and railings.

Highlights:

• Ultra-sleek 3/8-inch profile
• Tapered holes for straight or angled runs
• High-quality aluminum body
• Machined stainless universal pivot top
• Base cover plate included
• Post-leveling set screws
• Clean, press-fit base design

Continue Reading >

67 in Stock - Ships in 1–2 Business Days

Flat Black SD / 36" Flat Black SD / 42" Brushed Aluminum / 36" Brushed Aluminum / 42"

Color:

Flat Black SD

Brushed Aluminum

Height:

36"

42"

Qty:

Add to Cart

Cable Bullet Installation Kit

$ 150.00

This installation kit includes all the tools necessary to install any Cable Bullet system. Continue Reading > The Right Tools for the Job The Modified Manual Hydraulic Crimping Tool is used to securely fasten crimp sleeves to cable endpoints. This tool is...

Cable Bullet Crimper (RENTAL)

$ 100.00

Rent and Return This rental unit is perfect for small projects or one-time installations. Rentals are good for 90 days from the purchase date and may be returned for a $75 refund of the original $100 purchase price. Once your...

Boeshield Rust Free™ Rust & Corrosion Cleaner

$ 7.99

Quickly Clean Rust, Corrosion & Stains Use Boeshield RustFree to remove any rust, corrosion, or stains from your cable railing to help add to the longevity of your railing. If you use Boeshield T-9® Rust & Corrosion Protection, but you...

5/32" T316 Stainless Steel 7x7 Cable

$ 60.00

The Cable Bullet cable rail system was designed for use with 5/32", 7x7 cable.  Cable Bullet crimp sleeves are sized to fit 5/32" cable. The use of 7x7 cable is highly recommended. 7x7 Cable is bound in 7 bundles of 7...

47 in Stock - Ships in 1–2 Business Days

Select Spool Size: 100' 250' 500'

Select Spool Size:

100'

250'

500'

Qty:

Add to Cart

Boeshield T-9® Rust & Corrosion Protection: Waterproof Lubricant

$ 10.99

Protect Your Investment In order to protect your cable railing and hardware from oxidation and exposure to environments and chemicals that may accelerate the aging process, we recommend using Boeshield T-9 to help clean and protect it. This is especially important...

27 in Stock - Ships in 1–2 Business Days

Liquid / 4 oz. Aerosol / 4 oz.

Type:

Liquid

Aerosol

Size:

4 oz.

Qty:

Add to Cart