The Right Tools for the Job

The Crimp & Cut Multi-Tool is used to securely compress crimp sleeves and cut cable. The cutting blade and crimping jaws are designed for precision, accuracy, and ease. Each multi-tool features: 

• Cutting blade to cut 5/32" cable
• Crimping jaws to compress crimp sleeve 

If your project is larger than 100 tensioners (or 100 cable cuts), we highly recommend purchasing larger cutters (13” Hand-Held) for easier and faster cable railing installation.

This kit also includes two custom drivers for use with a 1/2" chuck drill/driver to set Bullets. Use the 3/32" Allen Wrench or 6" Hex Socket Head Power Bit to advance the set screws that tension each cable run.PLEASE NOTE: The set screws that tension each cable should be advanced by hand, not with a drill/impact driver..

Each installation kit includes:

• (1) Cut and Crimp Multi-Tool
• (2)Cable Bullet Drivers
• (1)Allen Wrench (3/32")
• (1)Hex Socket Head Power Bit (3/32")
• (1)Cable Bullet spare parts bundle (10 set screws, 10 lobed washers, 10 crimp sleeves)

Additional Required Tools:

• Masonry drill*
• ¾” Masonry drill bit* (vary by drill brand)
• Structural masonry epoxy* (MUST be compatible with 200lbs constant load and 800lbs impact load)

*not sold at cablebullet.com

Helpful Guides & Resources

Setup Guide:
Download PDF >